The Rode Stereo VideoMic On-Camera Microphone from Rode is a high-quality microphone designed for use with camcorders, DSLR cameras, and portable audio recorders. It features two high-resolution 1/2″ condenser capsules mounted in a fixed X/Y stereo array, providing a natural stereo recording, while offering a high level of rear rejection.
Rode Stereo VideoMic Camera-Mounted Stereo Microphone
₱13,650.00
[lwptoc]
Rode Stereo VideoMic
The Rode Stereo VideoMic On-Camera Microphone from Rode is a high-quality microphone designed for use with camcorders, DSLR cameras, and portable audio recorders. It features two high-resolution 1/2″ condenser capsules mounted in a fixed X/Y stereo array, providing a natural stereo recording, while offering a high level of rear rejection.
The RODE Stereo VideoMic can be used to capture environmental and ambient sounds, as well as live music. A built-in shockmounting system isolates the Stereo VideoMic’s capsule and electronics from its mount, providing isolation from external physical factors that can cause unwanted rumble and vibrations in the microphone.
Other features include a standard sized shoe mount for mounting on cameras, a 3/8″ thread in the base for mounting to a boom pole or stand, a high-pass filter at 80 Hz to prevent low-end noise, and a -10 dB pad that allows for the recording of loud sound sources. The Rode Stereo VideoMic is powered with a standard 9 Volt battery.
Key Features
- Fixed X/Y Stereo Array
- Two 1/2″ Condenser Capsules
- Camera-Mountable Stereo Recording
- -10 dB Pad
Stereo X/Y Recording
The Rode Stereo VideoMic features true X/Y stereo pick up for accurate ambience reproduction. Excellent off-axis rejection minimizes residual noise.
-10 dB Pad
The Stereo VideoMic features a -10 dB Pad switch for enhanced headroom and minimal distortion.
Camera and Boom Pole Mountable
The versatile shoe mount allows the microphone to be mounted to camcorders, stands, or boom poles.
Integrated Shockmount
The Stereo VideoMic features a permanently attached shockmount with a camera mounting shoe underneath. The shockmount features replaceable rubber O-rings that protect against noise caused by abrupt movement and shock.
High-Pass Filter Switch
A high-pass filter switch eliminates room ambiance and noise below 80 Hz. This results in improved intelligibility while recording around machinery, air conditioners, and traffic.
Internal Power
The condenser element is powered with a standard 9-V battery.
STEREO VIDEOMIC SPECIFICATIONS
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.50″ |
| Polar Pattern |   |
| Address Type | End |
| Frequency Range | 40Hz – 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 134dBSPL |
| Sensitivity | -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 20dBA |
| Power Options |  |
| Weight | 288.00g |
| Dimensions | 65.00mmH x 102.00mmW x 170.00mmD |
| Output |  |
COMPATIBLE ACCESSORIES
- Deadkitten Artificial Fur Wind Shield
- PG1 Cold Shoe Pistol Grip
- VC1 Minijack/3.5mm Stereo Extension Cable (3m/10′)
- Tripod Mini Tripod Stand
- Boompole Professional Boompole – 3.3m
- Mini Boompole Professional Boompole – 2.1m
- Stereo Videomic Bag Carry Bag for the Stereo VideoMic
- Micro Boompole Lightweight Boompole – 2m
- Pivot Adaptor 3/8″ pivoting boom adaptor
- SC4 3.5mm TRS to TRRS adaptor
- Micro Boompole Pro Ultra-Lightweight Modular Boompole – 2.2m
IN THE BOX:
There are no reviews yet.